-40%
Custom Build (30 Days): Hairball Audio 1176 Rev D w/ Orange Drop Mod, 2021 Model
Custom Build (30 Days): Hairball Audio 1176 Rev D w/ Orange Drop Mod, 2021 Model
Custom Build (30 Days): Hairball Audio 1176 Rev D w/ Orange Drop Mod, 2021 Model

Custom Build (30 Days): Hairball Audio 1176 Rev D w/ Orange Drop Mod, 2021 Model

$ 522.72

Availability: 100 in stock
  • Model: 1176 Rev D
  • Condition: New
  • Effect/Enhancement: Compression/Limiting
  • MPN: 1176 Rev D
  • Type: Dynamic Range Processor
  • Input/Output Ports: XLR In
  • Features: Active
  • Number of Channels: 1
  • Brand: Hairball
  • Rack Unit Height: 2U
  • Form Factor: Rack Mountable
  • All returns accepted: ReturnsNotAccepted

    Description

    Custom Build (30 days):
    Hairball 1176 Rev D with Orange Drop Mod - Brand New 2021
    . Built at Process Haus, an authorized builder for Hairball gear.
    When you order this item I will order the parts and build for you.  Will ship within 30 days, but most likely much sooner.  It takes me a couple days to build and then a couple days to burn in and final test for QA, once the parts are received. I put 30 days to build in time for the factory to ship the parts and UPS to deliver.... but usually I receive them in 7 - 10 days, upon receipt of your order.
    The 1176 Rev D with Orange Drop mod has a hybrid tone of a Rev D blackface and a Rev A blue stipe. It has the general tone of a Rev D with some of the bite and grit of a Rev A... but with the lower noise of the Rev D. Its almost the best of both types. I personally like it when you would want to use a Rev A on a snare or vocal that is louder in the mix, but don't want the overall noise the Rev A adds when the snare or vocal is at a higher level in the mix.
    This unit does not include stereo link module, but I have those in stock usually. If you want that added please purchase it from my other listing and I will install for free.
    STEREO LINK MODULE:
    https://www.ebay.com/itm/203276410807
    Revision D (v1.11) PCBs designed by MNATS
    Black anodized front panel made in Seattle, USA
    Custom 18 gauge steel zinc plated enclosure made in Seattle, USA
    Custom Ed Anderson O-12 reproduction input transformer made in the USA
    Custom Ed Anderson 5002 reproduction output transformer made in the USA
    Custom Ed Anderson 11754 reproduction power transformer made in the USA
    Custom BI Technologies T-Pad input attenuator
    Interlocking push button switches with “All Buttons In” mode
    Fully discrete audio path including capacitors selected by ear from Kemet, Nichicon, Panasonic, Vishay, United Chemi-Con and Elna
    Bourns trim pots
    Neutrik XLR connectors
    JST connectors and pre-assembled wire harnesses
    120/240 voltage select switch
    1% metal film resistors
    Matched FETs
    Authentic control knobs
    Orange Drop Capacitor Mod
    This revision covers the REV B thru E units. Most current reissues are based on this revision. Revisions C-E had a black front panel while the Rev B retained the silver and blue stripe panel. Changes were made to the stage and line amps so a bipolar transistor was used as the first active component. Low noise, or “LN” circuitry, was added to this and all future revisions. Like the Revision A, the input uses an O-12 transformer and the signal is attenuated at the input with a 600Ω T-pad. The output is class A, utilizing a 5002 output transformer. This is widely considered to be the most classic FET compressor sound.